Published at Wednesday, 01 August 2018. Drill Bits. By Admin.
Shank is the edge of drill bit which is grabbed by the chuck of a drill or the end of cutting drill bit which is connected with rod by the shank. It is appropriated with the chuck. The combination of shank and chuck give empowerment and increasing the accomplishment, for the examples are giving higher torque, giving higher speed, and bit movement with hammer. Shank drill bit is edge of drill which connect in the chuck of rotating axle. There are many types and kinds of drill bit shank. The main differentiation of the shank drill bit are shapes and different functions.
The advantage using SDS Shank is simply on installation of the chuck, it causes that the bit is easier to push into the chuck. Shank and chuck on this tool are created particularly for hammer drilling on stone and concrete with masonry drill. Actually, this shank is designed particularly with spring load installation system. This system makes the user easy to insert the chuck by hand. On the drilling process, the spring gives under pressure, it means the drill can be hammering and masonry performance.
Any content, trademark’s, or other material that might be found on the quintadrilling.com website that is not quintadrilling.com’s property remains the copyright of its respective owner/s. In no way does quintadrilling.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 quintadrilling.com. All Rights Reserved.