Published at Wednesday, 01 August 2018. Drill Bits. By Admin.
Morse taper shank is normally easy to be produced, but the user should have ability and familiar with this tool to assure right performance, such as on the transmission twisted create the variety if the procedural is not being used. This drill is suitable with chuck because there is non-circular shank cross section to prevent the slipping of rotation.
It is almost similar with hex shank, but it has three angles on the six’s hex. The features as same as with hex shank such as high-speed twist ability and good centering. The weakness of triangle shank cannot be attached on many different drill like hex shank.
The advantage using SDS Shank is simply on installation of the chuck, it causes that the bit is easier to push into the chuck. Shank and chuck on this tool are created particularly for hammer drilling on stone and concrete with masonry drill. Actually, this shank is designed particularly with spring load installation system. This system makes the user easy to insert the chuck by hand. On the drilling process, the spring gives under pressure, it means the drill can be hammering and masonry performance.
Any content, trademark’s, or other material that might be found on the quintadrilling.com website that is not quintadrilling.com’s property remains the copyright of its respective owner/s. In no way does quintadrilling.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 quintadrilling.com. All Rights Reserved.